LED Parking
Garage Light
INSTALLATION (3)
COLOR TEMPERATURE SWITCH
PARAMETER SETTING BY REMOTE CONTROL IN MANUAL OF RC-100 WIRING DIAGRAMS
- Move the switch left and
right to get the desired
color temperature.
- BRl823-B-D wiring with dimming ballast or LED
driver.
Dimming Driver
- BRl823-B-D wiring with non-dimming ballast or
LED driver.
Non-Dimming Driver
STRUCTURE OF MOTION SENSOR
RECOMMENDED DIMMER LIST
LUTON: NTSTV-DV / LEVITON: DS710-10Z / LEVITON: IP710 / Legrand: RH4FBL3PW
INSTALLATION GUIDE
MODEL #: ECR-55W103s / ECR-100W103s
©2020. Euri Lighting | A Division of IRTRONIX Inc. All Rights Reserved
For customer service please call us at 1-310-787-1100
Office Hours: 8:00 a.m. – 5:00 p.m. PST Monday-Friday
E-mail: [email protected]
Questions?
THIS PRODUCT MAY NOT BE COMPATIBLE WITH ALL DIMMERS, FOR MORE INFORMATION ABOUT DIMMER COMPATIBILITY PLEASE VISIT: WWW.EURILIGHTING.COM
LED Commercial Fixture
LED Parking Garage Light
s
PLEASE REVIEW THE INSTRUCTIONS AND WARNINGS LISTED BELOW PRIOR TO PROPER INSTALLATION
1
5
2
6
7
8
9
10
11
3
4
Disassemble the
driver box cover.
Fix the lower
bracket on the
driver box cover.
Loosen the 3/4 plug on
the driver box cover by
screwdriver.
Align with the holes
of upper and lower
bracket; tighten with
screws.
Cling the safety rope
in the driver box to the
hook inside the driver
box.
Use M20 waterproof
connector when
connecting AC wire
or dimming wire, take
relevant waterproof
measures at both sides
of inlet.
Connect the input line and ground; If
the fixture is equipped with sensor,
adjust the sensor settings; Take
relevant waterproof measures after
the wires are connected.
Align the drive box cover with
the metal shrapnel inside the
drive box and press upward to
fasten it together.
Lock the four screws, the
product is installed.
Drill holes on the
ceiling.
Fix the upper
bracket on the
ceiling.
