8
Eureka Customer Service HELPLINE 1-800-282-2886
Plug power cord into outlet.
Locate spray trigger on underside
of the handle. Before each use
hold the solution spray trigger
for 10 seconds to get cleaning
handle to lower into position for
vacuuming. Brushroll will only
spin only when handle is lowered
into reclined position.
When vacuum is
upright the brushroll will not spin.
turned the vacuum on pressing
the
button once.
To clean hold the solution spray
trigger to apply solution on both
forward and backward strokes.
For an optimal clean, make a few
wet passes followed by a few dry
passes over each area of you
clean on your rugs.
To turn off press
button a second time.
The
mode
dispenses twice the solution of
the
HARD FLOOR
mode for
optimized cleaning on area rugs.
!
Do not over wet the carpet. Be careful not to run the vacuum over large solid debris or edges of
area rugs as this may stall the brushroll and result in premature belt failure.
Before cleaning area rugs test a small area of the rug for color fastness. Also please check manufacturers cleaning
instructions before cleaning area rugs. Do not use for on silk or delicate rugs or wall to wall carpeting.
