Eureka NEU100 Series, Руководство пользователя

Страница: 12 / 14

Vacuum cleaner won’t run: Possible causes Remedies
1. Vacuum cleaner is not plugged in 1. Check electrical plug
2. Blown fuse/tripped breaker 2. Check/replace fuse or reset breaker
Vacuum cleaner won’t pick up dirt:
Possible causes Remedies
1. Dust cup is full 1. Empty dust cup
2. Filter dirty 2. Check, remove debris or clean
3. Hose not secure 3. Check to be sure hose is snapped into place at
both ends
4. Dust cup not in place 4. Make sure dust cup is fully inserted and dust cup
release handle is pushed in completely
5. Vacuum path clogged 5. Visually check air passageway, hose inlet, and
hose for anything that might be obstructing the
vacuum path. Carefully remove blockage
6. Rotating power brush drive belt broken 6. Replace drive belt
7. Drive belt stretched 7. Check drive belt area and remove obstructions
Replace drive belt if necessary
8. Floor brush bristles worn 8. Replace floor brush
9. Floor brush jammed 9. Remove floor brush and clean debris from
brush and ends Check drive belt for any damage
Problem solving
Replacement Parts
WARNING:
To reduce the risk of electric shock, turn power OFF and
disconnect plug from electrical outlet before performing maintenance or
troubleshooting to the vacuum cleaner.
Please do not return this product to the store
For any questions or concerns, Eureka is happy to be of service.
Contact us directly at 1-800-282-2886
t No. Part Name
1 E0101 Brush Tool
2 E0102 Crevice Tool
3 E0103 Hose
4 E0104 Brush Roll
5 E0105 Belt
6 E0106 Bin Filter
1
2
6
5
4
3
12