4
1
.
Slide wand onto hand vacuum
until it clicks (Fig. 1).
2
.
nozzle until it clicks (Fig. 2).
• Choose location near power outlet.
Locate point high enough on wall
nozzle to hang freely.
• Place mount against wall and use
pencil to mark drill holes.
• Drill holes (with 1/4” bit) and insert
drywall anchors. Insert screws
through holes on mount and tighten
store accessories
• Place assembled vacuum cleaner
on wall mount.
• Plug charger into power outlet and
then into charger port on handle
(Fig. 4).
•
•
Loop charger cord into clips on
Battery charge level will show on
the circle in the center of LED display
on handle. Lighted segments of the
circle will decrease in a clockwise
direction as the battery charge level
goes down.
wall mount.
• Indicator lights stop blinking when
fully charged.
• Charge battery fully before using for
six hours.
6
1
Click!
2
Click!
3
Eureka Customer Service HELPLINE 1-800-282-2886
Drywall anchors
Cord
clip
NEC380IMv4.indd 6
1/16/20 1:15 PM
