8.
Do not use this heater in closed environment.
9.
To avoid overheating, do not cover the appliance. Do not leave any object or cover on the appliance while it is on and
after off.
10.
This heater cannot used to dry clothes.
11.
Do not splash any liquid into the heater.
12.
Always place the heater on a flat and even surface.
13.
When the heater is lying on a side, turn it off immediately.
14.
The Flip Heater must be positioned vertically in relation to the floor.
15.
Never use this device near curtains, inflammable material, furniture, etc.
16.
Do not use flip heater in rooms with explosive gas or inflammable solvents / varnishes / glues.
17.
Do not place the appliance near inflammable substances (at least 90cm away from the heater). To prevent potential
risks of fire, never use the appliance on soft surfaces such as beds, where openings can be obstructed.
18.
When the appliance is not used and before any maintenance operations, disconnect the plug from the mains socket.
19.
In order to install correctly the heater, refer carefully WALL MOUNTING and MOBILE USE paragraphs.
20.
The power cord must never be in contact with the hot surfaces of the Flip Heater.
21.
Do not place the appliance directly below a power socket.
22.
Do not lay the power cord under a carpet. Do not cover the power cord with a cover or similar elements. Pay attention
not to place the power cable where it is likely to get into people's way.
23.
Never insert external objects in the ventilation and air intakes; as this could cause risk of fire, electric shock or
damage to the appliance.
24.
Never use the appliance with a programmer, timer or any other similar device that switches on the heating appliance
automatically, since there is a risk of fire if the appliance is covered or incorrectly positioned.
25.
Do not pull or damage the power cord.
26.
If the product does not work properly, immediately turn it off and disconnect it from the mains socket.
27.
The Flip Heater has a double IP protection: it has IPX1 when it is used as mobile and it has IPX4 in wall mounted
position. (Pic2)
28.
The product must be at least 40 inches far from inflammable objects. No objects should be placed nearer than 24
inches from the outlet vent.
29.
Make sure you completely know how to operate this Product and understand all the warnings, safety
matters and other details before use.
30.
All pictures are for reference only.
Wall Mount Installation:
Notice:
1.
In wall mounted position the Flip Heater has the higher protection level of IP24. It can be used in
bathrooms and damp places, but IT CANNOT BE INSTALLED WITHIN THE PERIMETER OF THE
BATHTUB OR SHOWER (VOLUME 1), or closer than 24 inches to the bathtub (VOLUME 2) as showed
in picture 3. Please notice that the Product cannot be installed within gray area. If your bathroom cannot
meet this installation requirement, please do not install inside the bathroom to avoid accident.
2.
Allow at least 24 inches from the Product to ceiling at the wall mounted position, 7 inces above the floor,
Содержание EWS-800H-W
Страница 3: ......
