Using this fan heater is easy. Just follow these simple steps.
1. Position your heater so the disbursement of warm air is unobstructed and is directed across the room. Position it in
a location that is representative of the room temperature. The unique side –angled air inlets allow the heater to be
placed closer to walls than possible with most ordinary heater (but do not place close to combustibles). Avoid areas
of temperature extremes such as cold drafts and heat registers (refer to important instruction for safe placement)
2. Plug power cord into a standard wall outlet.
3. Turn the power switch to on
4. Select fan speed and then medium or High heat.
5. (Suggested Usage) Set the thermostat to the highest setting. When the room reaches the desired comfort level, turn
the thermostat knob slowly counterclockwise until the heater cycles off.
1. Small grill spacing to avoid injury
2. Cool touch case: Safe to touch, even on high heat setting..
3. Automatic safety shut off system: if airflow becomes blocked, power to the heating element is shut off to prevent
overheating.
4. Automatic Tip-over protection: If tipped more than 10 degree in any direction, heat and fan functions immediately
shut down.
1. Your heater has no user serviceable parts. Do not disassemble the unit. This will void your warranty. If service is
required, please call our warranty department and make arrangements to return your heater.
2. The motor is permanently lubricated and requires no oiling.
Because your heater moves a substantial amount of air, it will need regular cleaning.
To clean follow these simple instructions:
1. Unplug the unit. Note: Do not use gasoline, thinners, solvents or other chemicals for cleaning.
2. Use the brush attachment on your household vacuum cleaner to vacuum any accumulated dust off the front
grill. Wipe down the entire surface with a soft cloth.
During the off-season or after extended periods of non-use, you may choose to store your heater. To ensure long life of the
product, it is recommended to store your heater by following these instructions:
1. Unplug power cord and bundle loosely
2. Thoroughly clean you heater
3. Cover, or place back in retail carton if available. This will prevent the unit from accumulating dust overtime.
4. Store unit in a cool and dry location
HOW TO USE
ADVANCED SAFETY FEATURE
STORAGE
HOW TO CLEAN
