2
Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
How to identify parts of vacuum cleaner
Type S belt
Exhaust/HEPA
filter EF6
Washable filter
DCF25
Brush roll
Handle
Turbo nozzle
(on some models)
Dust cup release
Filter assembly
(located inside dust cup)
Dust cup
Exhaust/HEPA
filter compartment
(located behind dust cup)
Height adjustment knob
Brush roll cover
Cord clip
Carry handle
Wand
Lower hose retainer
Base hose
Maintenance schedule
Maintenance Schedule is also located on back side of dust cup.
!
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Power switch is marked
for On/Off.
I
Air path
selector knob
Cord rewind switch
Power switch
Brush roll lever
Handle release
Crevice tool
Dusting brush
BRUSH ROLL – Clean monthly
TYPE S BELT – Replace worn, cut or out of shape belt
SPECIAL FEATURES
Available on some models
Turbo cover
Stair hose
Wand 2
Hose
Suction plates
Power cord
Cord reel
WAND
2
2
Turbo
nozzle
Filter assembly
Was
hab
le
Empty cup after each use
Remove vacuum cover for
belt change instructions
Press lever to
release bottom lid.
Debris will empty.
Close lid until
it clicks.
Remove 4 screws and lift off cover.
Exhaust / HEPA filter EF6
Replace within 6 months
Washable dust cup filter DCF25
Clean as needed to maintain suction
Pull filter latch to release dust cup
cover. Lift out cup filter. Wash filter;
allow to air dry
thoroughly
.
Lift out filter tube and screen.
Shake off dust. Rinse; dry
thoroughly
.
Lift latch and
remove dust cup.
Press down tab
and remove
filter cover.
Lift out filter and replace. Reinstall
cover and snap into place.
Align tabs on filter tube, screen
and cup; drop into position.
Reinstall cup filter. Close cover.
Filters and screen must be in place for cover to lock.
HEPA filter cover must be in place at all times.
Periodically check hose
for clogs in order to
prevent air restriction.
!
N O T I C E
To view our
instructional video,
please visit
www.eureka.com
