What’s in the carton
STEP
11
Vacuum cleaner
Handle
Carry handle
Lower hose retainer
Dusting
brush
Crevice
tool
WAND
1
1
WAND
2
Hose
Turbo holder
Dust
cup
Easy assembly
Remove dust cup
to assemble vacuum.
Place handle on
vacuum; push down
to snap in place.
Slide carry handle into back of
handle. Snap into place.
STEP
22
!
PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
Moving parts! Assemble the vacuum cleaner before using.
Insert top tab
A
turbo holder into handle. Place thumbs on each side
and snap bottom corners
B
into place. Turn
C
knob to lock.
Store turbo nozzle in holder.
Some models:
Snap
D
turbo cover
straight on from front to back.
Empty
dust cup
after
each use.
No screws
or tools
required!
Place lower hose retainer
in slots on back of vacuum.
Push down to snap into place.
To install hose connector,
align tab at right and
snap on at left.
WAND
WAND
2
1
Pull out bottom of lower hose
retainer and position hose.
Place hose over
carry handle.
How to use and clean your vacuum
TOO
LS
FLO
ORS
Step on handle release to
lower handle into position.
Brush roll on/off lever:
Turn brush roll lever on for
carpet; turn brush roll lever
off for bare floors and tools.
To vacuum floors, turn
air path knob to ‘floors.’
Pull out cord to desired length.
Do not pull past red line; push
cord into cord clip.
Use foot to adjust height for
carpet or bare floors.
Step on power switch to turn
on; step on again to turn off.
Press switch to rewind cord.
Remove dust cup; press lever
to release bottom lid.
Pull filter latch to release cover. Lift out foam filter and shake off dust.
Lift out filter tube with screen; shake off dust. Reinstall filters and close cover.
STEP
33
!
Power
switch is
marked
for
on-off.
I
Attach tool to end of wand.
Turn air path knob to ‘tools.’
Some models:
Slip wand 2
over wand 1.
Push wand 1 onto end of
hose. Place over bottom
hook; snap in at top.
WAND
1
Store dusting brush and crevice tool on back
of vacuum. Store turbo nozzle in holder
(tools vary by model).
AS1100-1109 Series
With cord rewind
THANK YOU FOR PURCHASING YOUR NEW EUREKA VACUUM!
Helpline Hours:
8 a.m. to 7:30 p.m. (CST), Monday - Friday
10 a.m. to 6:30 p.m. (CST), Saturday - Sunday
Please take a few moments to read this Quick Start Guide. It is designed
to help you assemble your vacuum easily.
To view our “How to Assemble” demo, visit www.eureka.com/suctionseal/assembly
If you have questions about your new vacuum, please contact our
customer service helpline at
1-800-282-2886
. We’re here to help!
Important Safeguards
OWNER’S
GUIDE
3
5
1
8
9
11
7
6
QUICK START GUIDE
Follow
1-11
in order
to ensure
proper
assembly.
4
TOO
LS
FLO
ORS
Snap!
Snap!
WAND
11
10
A
B
Snap!
Air path
knob
Air path
knob
Lock!
D
C
Stair Hose
SPECIAL FEATURES
Available on some models
Turbo nozzle
Turbo
cover
Wand 1
Wand 2
WAND
1
WAND
2
2
2
Was
hab
le
