2
Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
How to identify parts of vacuum cleaner
U belt
(
HEPA filter on some models)
Exhaust filter
EF6
Premotor
filter
Brush roll
Handle
Turbo nozzle
(on some models)
Bag indicator
Bag compartment
Exhaust/HEPA
(located behind dust cup)
Premotor filter
Height adjustment knob
Brush roll cover
Upper hose retainer
Upper cord retainer
Crevice tool
Carry handle and cord wrap
Lower cord retainer
(on carry handle)
Wand
Power cord
Quick release cord wrap
Lower hose retainer
Base hose
Maintenance schedule
!
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Power switch is marked
for ON-OFF.
I
Air path
selector knob
Hose
Power switch
Handle
release
Dusting
brush
BRUSH ROLL – Clean monthly
U BELT – Replace worn, cut or out of shape belt
SPECIAL FEATURES
Available on some models
Turbo nozzle
Turbo cover
Disposable
bag style AS
DISPOSABLE DUST BAG, Style AS – Replace when indicator turns orange
EXHAUST FILTER EF6 – Replace within 6 months
PREMOTOR FILTER – Clean as needed to maintain suction
Remove dust cup.
Press down tab and
remove filter cover.
Lift out filter and replace. Reinstall
cover and snap into place.
2
1
Never use vacuum without dust bag in place
Never use vacuum without premotor filter in place
Replace bag when green
indicator turns orange.
Pull up latch
to open cover.
Fold over hygienic flap
and tuck in.
Lift handle
and remove
disposable dust bag.
Line up flat edge to
install new bag.
Close cover and snap
to lock in place.
Pull latch to
release bottom lid.
Remove filter; rinse and dry thoroughly.
To reinstall filter, push curved edge under tabs.
Close bottom lid until it clicks.
