Can one store water from Aquaguard Classic or use
it directly?
Ideally, you should use water directly from the Aquaguard
Classic. However, if you need to store the water, make
sure you rinse the bottles or containers first with water
from Aquaguard Classic and not with tap water. Even
while drawing water, remember to rinse the tumbler with
water from Aquaguard Classic.
How
long
and
where
should
one
store
the water?
Water from Aquaguard Classic should be stored in a cool,
clean place, preferably in steel or glass containers. Avoid
matkas or filters as they tend to breed bacteria. Cover the
container with a clean lid and ensure that the storage vessels
are rinsed with water from Aquaguard Classic.
For hygienic reasons, it’s preferable to change the stored
water at least after 2 days.
Does drinking water from Aquaguard Classic make
you lose your natural immunity?
Aquaguard Classic gives you clear, safe drinking water thus
reducing the risk of exposure to water borne diseases. It
does not affect your body’s natural immunity in any way.
Is UV (ultraviolet) light dangerous and is drinking
UV treated water harmful?
Direct exposure to strong doses of UV light at a close
range is dangerous. However, in Aquaguard Classic the
ultraviolet chamber is completely enclosed and no UV light
is allowed to escape.
Also, UV light has no residual effect in water and hence it is
totally safe.
Does Aguaguard Classic work even if the voltage
fluctuates?
Aguaguard Classic has superior electronics, with a built-in
voltage stabilizer, thus ensuring that your Aguaguard works
even if the voltage goes down to as low as 160V. If
however, the voltage drops below 160V, the yellow LED
begins to blink and the alarm sounds, indicating your unit
cannot be used temporarily.
Do you need to boil or filter water from the
Aquaguard Classic?
Of course not. Aquaguard Classic is a complete purification
system which gives you clear, safe water. Just fill your glass
and drink!
What will happen if Aquaguard Classic is switched
on when the storage container does not have water?
Even though a thermal cut-off device is in-built in the
machine to protect the pump from over heating, utmost
care should be taken to always check the container for water
before switching on the unit
.
Failing which
the heating
might lead to serious damage to the pump.
ANSWERS TO YOUR
QUESTIONS ON
AQUAGUARD CLASSIC -
PUMP MODEL
6
A
Q
