Eureka Forbes Aquasoft 600 Скачать руководство пользователя страница 4

Installation Illustration

4.  Install  the  cover  back  on  the  system,  and  make  sure  to 

align the knob and the hole on the cover. Keep the inlet and 
outlet hose free from stress.

5.  Inset the Regeneration (Regen.) knob back to the knob axis in the proper direction, and turn 

the knob to Service (Ser.) position, close the slide cover completely. The system is now on 
standby for use. (NOTE: Knob position based on the direction indicated by tiny outshoot of 
the knob.)

Note:  For  first  use  after  the  installation  of  system,  it  is  recommended  to  turn  ON  the  shower 
and keep the water flowing for 2-3 minutes, in order to clean up the plumbing and fittings.

Usage and Maintenance

1

.

Service

 

Regeneration button on Service mode, can provide softened water by shower for customer use.

 

Note:  Under  service  mode,  water  flows  from  the  shower  and  the  system  will  refill 

automatically until it is finished and maintains the brine level.

2.  Regeneration

 

Once  the  hardness  of  output  water  increases,  it  means  Aquasoft  ion  exchange  resin  is 

exhausting  and  system  needs  regeneration.  Ensure  that  Aquasoft  Salt  tank  contains 
sufficient quantity of regeneration. Spin the knob to the Regeneration position, and put the 
shower in the bathtub or entrance of the floor drain, turn on the shower and make the brine 
flow out from shower for around 30 min. When finished, turn OFF the shower and turn back 
to Service position, then turn on the shower again, rinse for 1-2 min. to drain the remnant 
regenerating brine.

 

Note: Regenerating salt is made up of 

 food-grade salts, and will not harm you.

non-iodized

3

.

  Add Salt

 

The  system  needs  salts  to  regenerate  its  capacity.  Please  check  the  salt  storage  in  time 

during usage and keep unmelted salt in the brine tank. Open the system’s slide and put salt 
into the tank equably. It is recommended you add 3-4 kg salt in each exhausted cycle.

4.  Maintenance

 

Needs no special maintenance under normal usage. If the system is 

not  used  for  more  than  a  week,  it  is  recommended  to  rinse  the 
system  for  1-2  min.  before  usage,  to  ensure  you  get  high  quality 
fresh soft water.

6

5

Содержание Aquasoft 600







Отзывы: