INDICATION CHART TO USE
AQUAGUARD
®
SELECT
C UV HOT
Indication
Unit Status
Indication
Unit Status
Power On - All LEDs will blink for 1 sec in Blue, Yellow
and Red.
Temperature sensor fault
All LEDs will blink in Red at 0.5 sec rate.
UV Fault / LDR Fault
All LEDs ON for 0.5 seconds and OFF for 3 seconds.
SV Fault
All LEDs ON, OFF, ON for 0.5 seconds and then OFF
for 3 seconds. Cycle repeats.
EA fault (if both 2 EA chip not connected or if main PCB
to junction PCB harness is not connected) LED 2, 5 & 7
is solid. LED 1, 3 blinks @0.5 second rate.
Combination
Cartridge EA fault (Blue) LED 2, 5 & 7 is solid.
LED 3 blinks @0.5 second rate.
Active Copper cartridge EA fault (Beige)
LED 2, 5 & 7 is solid. LED 1 blinks @0.5 second rate.
Purification Process
Warm Mode ON
Hot Mode ON
Ready to dispense - All LEDs become solid.
Blue - Ambient Water
Yellow - Warm Water
Red - Hot Water
Dispensing - Touch the centre of LED indication;
single LED rotates clockwise.
Blue - Ambient Water
Yellow - Warm Water
Red - Hot Water
EA Fault:
LED 2, 5 & 7 will be solid
LED 1, 3 or only 1 or 3 will blink @0.5 second rate
depending on the filters.
Sleep Mode - If unit is not in use for 10 minutes, unit
goes to sleep mode. To activate, touch the centre of
LED indication.
Flush - Touch and hold centre of LED indication for
10 seconds. LEDs rotate anti-clockwise. To stop flushing,
touch the centre of LED indicator again.
(Caution: Do not drink the water which comes out during
flushing mode).
Filter life warning/End of life.
Switch off the power and water supply, if unit is not used for 3-4 hours.
OFF
0.5sec
0.5sec
0.5sec
0.5sec
0.5sec
0.5sec
3sec
0.5sec
3sec
3sec
0.5sec
1
2
4
6
7 5
3
AQUAGUARD
®
SELECT
UV HOT
VOCs
Enhances the taste of the water and
increases the level of essential minerals
which helps in improved health and
body functions. At the same time,
balancing the pH of water, making it
healthy.
*
A unique combination of
naturally occurring vital
minerals like Calcium,
Magnesium, Copper, and
Zinc with anti-microbial
carbon granules.
AQUAGUARD
®
SELECT C UV HOT
Aquaguard
®
Select C UV HOT
6.2 kgs. (Approx.)
Combination Cartridge, UV Lamp, Active
Copper Maxx
TM
Cartridge, Biotron
TM
Cartridge
150V AC to 280V AC, 50Hz
Ambient Water: 1.5 Liters / min @ 1bar pressure
Hot / Warm water : 1 Liter / min @ 1 bar pressure
20 Watts max in Ambient mode & 775 Watts in
Hot / Warm mode
External: 230V AC, Internal: 12V DC, 1.7 Amps
11 Watts
Tank Volume
Temperature Sensing
500 ml.
HOT TANK DETAILS
Thermistor (Electronic Thermostat)
Input Iron (max.)
0.3 PPM
0.2 PPM
Up to 200 PPM
Flow Rate (Approx.)
Aquaguard
®
Select
Aquaguard
®
Select
Aquaguard
®
Select
Aquaguard
®
Select
Aquaguard
®
Select
Aquaguard
®
Select
Aquaguard
®
Select
Aquaguard
®
Select
• Do not overflow the glass container with hot water
• To get hot / warm water, touch the respective switches
TM
