Euphonix Max Air Installation Guide
System 5 Components
36
3.1.1 Sync Card
AES Sync In
(BNC): The DF66 SuperCore
clocks to the signal at this port when the
sync source is set to AES Sync.
Connect this port to a digital sync reference.
AES Sync In
(3-pin Lemo Female): The DF66 SuperCore clocks to the signal at this
Word In
(BNC): The DF66 clocks to the signal at this port when the sync source is set to
Word Clock. Connect this port to a digital sync reference.
Word Out
(BNC): This signal is active regardless of selected sync source.
3.1.2 Bridge Card
3.1.3 SP662 DSP Line Card
port when the sync source is set to AES Sync. Connect this port to a digital sync reference.
Bridge Cards are used to connect (or bridge) multiple SP662 DSP Line Cards in a DF66.
They mount on top of the SP662 cards. The Bridge Card shown in Figure 3.2 is a 6x6 (for
bridging six SP662 cards). Other types of Bridge Cards are 2x2, 3x3, 4x4, and 5x5.
MADI In (4) and MADI Out (4) digital audio ins and outs on a Combination D (Combo
D) Subminiature connector. A MADI I/O DSP Line Card Cable connects to this Combo
D connector and transports the MADI I/O to eight BNC connectors. See the MADI
Hookup diagram (figure 2-9) and the MADI I/O DSP Line Card Cable diagram (figure
3-3) for details on these connections.
Figure 3-3
MADI I/O DSP Line Card Cable
An optional 16-port BNC Bulkhead Panel (see figure 3-4) allows BNC panel access to the
DSP cards’ MADI ports.