professional control surfaces
Artist Series
EuCon APPLICATION SETUP GUIDE
MACKIE CONTROL
20
4.
Now both programs can follow the same instructions. Click the
+
button.
The Add Control Surface dialog opens.
Figure 6-5
Add Control Surface dialog
5.
Select
Mackie Control
from
the
Control Surface Type
drop-down menu.
6.
For the
Input
and
Output Connection
drop-down menus, select the MIDI send
and receive ports.
These will be the same port, so if Soundtrack Pro uses ports 5–8, the first
controller sends and receives on port 5.
7.
Click
OK
to close the Add Control Surfaces dialog.
8.
Repeat steps 4–7 for each additional Artist control surface in your network.
9.
in Final Cut Pro, click the
OK
button. In Soundtrack Pro, click the
Close
but-
ton at the top-left to close the Preferences.
The Artist devices connect and update with new track information.
Your Artist device should now be controlling your application. If not:
•
Make sure Final Cut Pro or Soundtrack Pro is the
front-most
application
(i.e.,
the one receiving keystrokes and mouse clicks). The Artist devices control
only the front-most application.
•
Check that all steps in
Setting Up EuCon for Mackie Control
on page 16 and
in this section have been performed correctly, and reboot your Mac.
•
Make sure the Euphonix MIDI device in
Applications->Utilities->Audio MIDI
Setup
is blue (active) and not gray (inactive). If inactive, select it, click
Re-
move Device
, and click
Rescan MIDI
.
Содержание EuCon
Страница 4: ......
