EUCHNER 106300 Скачать руководство пользователя страница 27

27

106595-09-06/20 (Translation of the original operating instructions)

Operating Instructions

Non-Contact Safety Switch CES-AH-C03-AH-SM

EN

12.  Ordering information and accessories

Tip!

Suitable accessories, e.g. cables or assembly material, can be found at www.euchner.com. To order, 

enter the order number of your item in the search box and open the item view. Accessories that can 

be combined with the item are listed in 

Accessories

.

13.  Inspection and service

WARNING

Loss of the safety function because of damage to the device.

 

Ì

In case of damage, the entire device must be replaced. 

 

Ì

Only accessories or spare parts that can be ordered from EUCHNER may be replaced.

Regular inspection of the following is necessary to ensure trouble-free long-term operation:

 

Ì

Check the switching function (see chapter 

9.3. Functional check on page 16

)

 

Ì

Check the secure mounting of the devices and the connections

 

Ì

Check for soiling

No servicing is required. Repairs to the device are only allowed to be made by the manufacturer.

NOTICE

The year of manufacture can be seen in the lower right corner of the rating plate. The current version 

number in the format (VX.X.X) can also be found on the device.

14.  Service

If servicing is required, please contact:

EUCHNER GmbH + Co. KG

Kohlhammerstraße 16

70771 Leinfelden-Echterdingen

Germany

Service telephone:

+49 711 7597-500

E-mail:

[email protected]

Internet:

www.euchner.com

Содержание 106300

































Отзывы: