USING / OPERATE your etzMAN
Before using your etzMAN, make sure for the Bean-Blocker-Handle to be in OPEN
position (if operated with Hopper). Insert Portafilter.
etzMAN-W only
: Press desired Preset-button (1, 2, 3). Display will show the
programmed weight in grams. Press TARE.
Turn the crank counter-clockwise while holding on to the upper backside of the
grinder to ensure stability.
etzMAN-W only:
While grinding, the display will show the corresponding weight in
grams. When drawing closer to the target weight, an acoustic alert will be heard.
Once the target weight is reached, the sound will be nonstop.
Use the enclosed cloth/glove (Delivery Content) to protect the grinders´ surface
while grinding and for a more comfortable grip.
Use AP-cone for traditional roasts or Pour Over, use ETZI-cone for lighter roasts.
CALIBRATE your etzMAN-W
After moving it or in case of inconsistencies, we recommend to recalibrate your
etzMAN-W as follows:
Take off Hopper and Portafilter Holder as described, then press any button to turn
on Display
Turn Adjustment to the left beyond Click 16 until Display turns itself off, then move
it back to 16. Press 1 and MODE simultaneously until the screen shows 0.00
followed by CAL.
Place 500g Calibration Weight onto the center hook, then press MODE for at least 3
seconds (500 will blink and then show END, followed by your setting).
Remove weight, press MODE and reposition weight on center hook to confirm
weight (500g). Press TARE to return to normal mode
