Disassembly and Cleaning
etz-P®
3
6
ETZINGER AG
Wirtschaftspark 44
FL-9492 ESCHEN
Email: [email protected]
Bottomside
1
Ring Burr
Coneholder
Adjustment
Cone Burr
2
3
Position & Engage
3-4
5
1.
Remove magnetically attached Catch-up by gently pulling it down, turn it around
2.
Bottomside of Collection Cup may now be used as a tool
3.
Fit bottomside of Collection Cup into Adjustment Ring and make sure for it to engage
4.
Once engaged, slightly move Collection Cup back and forth to release remains stuck from within
5.
Turn Collection Cup with Adjustment Ring to the left (versus COARSE). Make sure for marking to be in line with arrow before pulling Adjustment Ring off
6.
Clean coneholder and cone burr with a brush. Brush out ring burr affixed to the grinder body
7.
Reposition Adjustment with coneholder and cone burr at indicated arrow (make sure for arrow and marking to be aligned). Groove must engage properly before you can press up Adjustment Ring
and move it to the right, back to the stepped part or your initial setting
