GUIDE
Grinder Parts
1 Housing with Turning Knob
2 Lid
3 Adjustment Ring with coneholder & cone burr
4 Magnetically attached catcher (optional)
ETZINGER AG
(FL-9492 ESCHEN) - Phone: +423 375 8383 -
- Email: [email protected]
etz-P®
Technical Data
Burrs:
32mm Diameter (Cone Burr)
Hardened steel (62 HRC)
Weight:
620g (without catch-up cup)
Diameter Housing:
55mm
Catcher:
60mm outside / 55mm opening
Height:
221mm
Material Housing:
Anodised Aluminum
Material Adjustment Ring:
Fibreglass reinforced plastic (FRP)
1
2
3
4
Thank you for choosing our Pepper Mill
etz-P
, an innovative pepper grinder facilitating manual grinding not just in regards of handling and adjusting.
Open the box and carefully pull out the grinder. Make sure to check the delivery content before getting your grinder ready for use. To get started,
please follow our instructions and pictures. To clean your grinder, use a soft cloth and/or a brush. Do not clean the burrs with water and avoid to
touch them with wet fingers.
For more information, please visit our Website (for Warranty policy, see
„
Good to know
“).
THANK YOU
–
ENJOY THE GRIND!!
