9
FCC ANd OTHEr iNFOrmATiON
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. Some
equipment operates at frequencies that may cause interference to nearby TVs and VCRs; to minimize or prevent such
interference, the system base should not be placed near or on top of a TV, PC monitor, or VCR; and, if interference is
experienced, moving the desk station farther away from the TV or VCR will often reduce or eliminate the interference.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the system off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
1. Increase the separation between the equipment and receiver.
2. Consult the dealer or an experienced radio TV technician for help.
FCC HEALTH ANd SAFETy iNFOrmATiON
Your device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The
FCC has established criteria for the amount of radio frequency energy various products may produce depending on their
intended usage. This product has been evaluated and found to comply with the FCC’s exposure criteria. For body worn
operation, the FCC RF exposure guidelines were also met when used with the accessories supplied or designed for this
product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines and should be avoided.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate this device.
iNduSTry CANAdA
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules.
This device complies with Part 15 of the FCC rules and with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre
le fonctionnement.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
Your device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
The FCC has established criteria for the amount of radio frequency energy various products may produce depending
on their intended usage. This product has been evaluated and found to comply with the FCC’s exposure criteria. For body
worn operation, the FCC RF exposure guidelines were also met when used with the accessories supplied or designed for
this product.
Use of other accessories may not ensure compliance with FCC RF exposure guidelines and should be avoided.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate this device.
This device must not be co-located with other transmitters.
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field
in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s
website www.hc-sc.gc.ca/rpb
