
29731-03A
20
Installation - Remote Connections
Connecting to Provision Security
This tanning bed comes equipped to connect
directly to the Provision Security system utilized
by Anytime Fitness locations. Follow the direc-
tions below to connect your bed to the system.
Contact Provision Security directly for the
software and for any issues related to the
security system.
Call 866-315-0777 and ask
for Technical Service.
This panel holds a terminal strip
to connect the bed to a comput-
er and the door reader. Run the
5-conductor cable from the
computer and the 2 wires from
the door reader through the wire
clamp and the plastic grommet
and connect to this terminal strip
as described below.
2
Pull the wire clamp tight to hold
the cables and insert the access
panel back into the booth. Secure
the panel in place with the 2
screws removed earlier.
3
WIRE CLAMP
GROMMET
PANEL
COMPUTER
RS422
ADAPTER
DOOR CONTACT
Run a 5-conductor cable from the
computer RS422 adapter to the bed.
Connect the wires as shown.
Two wires connect to the door contact.
Directly above the power
cord is a small access panel
secured by 2 screws.
Remove the screws and
carefully pull the panel from
the booth.
1
Содержание SunDome 548V
Страница 1: ...29731 03A...
Страница 31: ...29731 03A 26 Notes...
Страница 33: ...29731 03A...
Страница 34: ...29731 03A...