MODEL 3116 DOUBLE-RIDGED WAVEGUIDE HORN
Mounting Instructions
© EMC TEST SYSTEMS, L.P. – MARCH 2002
3
REV E – PN 399040
Step 3.
To rotate the antenna, while holding the antenna with one
hand remove both thumbscrews from the mounting bracket.
Rotate the antenna so the bracket holes line up with the two
horizontal mounting holes on the back of the antenna. Re-
insert and tighten the thumbscrews.
Type K Connector
Mounting Bracket
Thumbscrews
NOTE This illustration shows the Model 3116 vertically
polarized for the purpose of introducing the primary
mounting components. Typically the horn will be mounted
in the horizontally polarized position for testing.
