ETS-Lindgren HI-6100, Руководство пользователя

Страница: 14 / 71

14 |
Maintenance
Laser Probes and Maintenance of Fiber Optics
The fiber optic connectors and cables used with laser-powered probes can be
damaged from airborne particles, humidity and moisture, oils from the human
body, and debris from the connectors they plug into. Always handle connectors
and cables with care, using the following guidelines.
Before performing any maintenance, disconnect
the fiber optic cables from the unit and turn off
power.
When disconnecting fiber optic cables, apply the
included dust caps to the ends to maintain their
integrity.
Before connecting fiber optic cables, clean the
connector tips and in-line connectors.
Before attaching in-line connectors, clean them
with moisture-free compressed air.
Failure to perform these tasks may result in
damage to the fiber optic connectors or cables.
C
LEANING
I
NSTRUCTIONS
See an online demonstration of the proper cleaning procedure at
www.ets-lindgren.com/FiberCleaning .

When handling fiber optic cables and connectors it is important that the
mating connectors, fiber tip, and ferrule be cleaned before inserted into
the fiber optic system.

To clean the sides of the ferrule, use a folded lens-grade, lint-free
tissue saturated in industrial grade isopropyl alcohol. Place the
connector ferrule in the folded tissue, and apply pressure to the sides
of the ferrule. Rotate the ferrule several times to remove all
contamination from the ferrule sides.