ETS-Lindgren HI-3638 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 41

ETS-Lindgren HI-3638 Скачать руководство пользователя страница 5

www.ets-lindgren.com

v

Notes, Cautions, and Warnings

Note:

Denotes helpful information intended to provide tips for better

use of the product.

Caution: Denotes a hazard. Failure to follow instructions
could result in minor personal injury and/or property
damage. Included text gives proper procedures.

Warning: Denotes a hazard. Failure to follow instructions
could result in SEVERE personal injury and/or property
damage. Included text gives proper procedures.

Note:

See the ETS-Lindgren

Product Information Bulletin

for safety,

regulatory, and other product marking information.

Safety Information

Refer to Manual: When product is marked with this
symbol, see the instruction manual for additional
information. If the instruction manual has been misplaced,
download it from

www.ets-lindgren.com

, or contact

ETS-Lindgren Customer Service.

High Voltage: Indicates presence of hazardous voltage.
Unsafe practice could result in severe personal injury or
death.

High Voltage: Indicates presence of hazardous voltage.
Unsafe practice could result in severe personal injury or
death.

«
...
3
4
5
6
7
...
»

Содержание HI-3638










































Отзывы:

Нет отзывов