ETS-Lindgren 8000-002 Скачать руководство пользователя страница 21

 

www.ets-lindgren.com 

Warranty 

21 

 

Appendix A:  Warranty 

Scope and Duration of Warranties 

Seller warrants to Buyer that the Products to be delivered hereunder will be (1) free 

from defects in material, manufacturing workmanship, and title, and (2) conform to 
the Seller’s applicable product descriptions and specifications, if any, contained in or 
attached to Seller’s quotation. If no product descriptions or specifications are 
contained in or attached to the quotation, Seller’s applicable product descriptions and 
specifications in effect on the date of shipment shall apply. The criteria for all testing 
shall be Seller’s applicable product specifications utilizing factory-specified calibration 
and test procedures and instruments. 

All product warranties, except the warranty of title, and all remedies for warranty 

failures are limited to three years. 

Product Warranted 

Duration of Warranty Period 

Model 8000-002 RF Power Amplifier 

Three Year(s) 

Any product or part furnished to Buyer during the warranty period to correct a 

warranty failure shall be warranted to the extent of the unexpired term of the warranty 

applicable to the repaired or replaced product. 

The warranty period shall commence on the date the product is delivered to Buyer; 

however, if Seller assembles the product, or provides technical direction of such 

assembly, the warranty period for such product shall commence on the date the 

assembly of the product is complete. Notwithstanding the foregoing, in the event that 

the assembly is delayed for a total of thirty (30) days or more from the date of 

delivery for any reason or reasons for which Seller is not responsible, the warranty 
period for such product may, at Seller’s options, commence on the thirtieth (30th) day 
from the date such product is delivered to Buyer. Buyer shall promptly inspect all 

products upon delivery. No claims for shortages will be allowed unless shortages are 

reported to Seller in writing within ten (10) days after delivery. No other claims 

against Seller will be allowed unless asserted in writing within thirty (30) days after 

delivery (or assembly if the products are to be assembled by Seller) or, in the case of 

alleged breach of warranty, within the applicable warranty period. 

Содержание 8000-002


























Отзывы: