EtroVISION EV6250A Series, Инструкция по сборке

Страница: 14 / 41

14
While not pushing too firmly, push down to make sure the connector is inserted
into the port. Verify the camera mounts are settled properly into the saddle.
Spin the camera dome to find the 2 slotted screw heads on the base inside of the
camera; using a slotted screwdriver tighten the screws to secure the camera to the
inner housing camera plate.
Screw the dome cover into the inner housing
Set the bracket arm into the power box hinges and hook the power box safety
clasp to the loop in the base of the bracket arm.