3
Setup
47
System Log – View Log
The System Log displays system and event details.
The System Log has information specifically related to basic system messages (e.g. startup, shutdown) while
the Event Log contains information related to events triggered.
System Log – Remote Log Setting
The System and/or Event log data can also sent to another server. The syslog service is used to send the
message data, and the camera will use UDP port 514 (syslog protocol) to transmit the data.
The remote server which will receive messages must have an application which will receive and manage the
syslog messages. If using Windows, an application such as Kiwi Syslog Server or Splunk can be used to
receive and manage the data.
NOTE:
the remote server’s firewall or a router may block incoming UDP syslog traffic from the camera. If the
remote server’s monitoring application is not receiving message data from the camera, verify the router or
firewall are not blocking incoming traffic.
To enable remote logging, check the
Enable
box and provide the corresponding log server IP address.
