V.
SLOWING DOWN/BRAKING
In the United States, bicyclists are required to use a hand signal to alert surrounding traff ic
of their intention to slow down or stop. Your eTrike is equipped with rear braking lights which
activate when you engage either hand brake, and which may be used in place of the hand signal.
If the rear braking lights are not functional, you should have the eTrike serviced immediately
for repair. The proper hand signal must be used if riding the eTrike without rear braking lights.
a.
Braking: Release the throttle and squeeze both the front and rear hand brakes with equal
pressure until the eTrike comes to a full stop.
b.
Slow Down: Release the throttle and squeeze both the front and rear hand brakes with
enough equal pressure to slow the eTrike down to the desired speed.
VI.
INSTRUMENT DISPLAY (Detailed on page 18)
a.
Speedometer – Displays your current speed (km/h).
b.
Battery Life Indicator – Displays the current battery life in
a graphic and voltage.
c.
Trip Odometer – Displays the kilometers per trip/ignition.
d.
Odometer - Displays the overall kilometers.
VII.
HEADLIGHT
The headlight can be used whenever low visibility in natural light compromises the safe
operation of your eTrike.
a.
To turn the running light on, move the switch on the right hand to the middle position.
b.
To turn the headlight on, move the switch on the right hand to the far left.
c.
To adjust the brightness, move the switch on the left hand.
VIII.
HAZARD LIGHTS
To turn the hazard lights on/off , press the switch on the right hand controller.
IX.
HORN
To sound the horn push down the horn button on the left hand controller.
OPERATING YOUR ETRIKE
7
Bright light switch
Headlight switch
