CAUTION
Release of the throttle does NOT engage the braking system. In order to fully stop the
eTrike from moving, you must engage the brakes.
OPERATING YOUR ETRIKE
a.
Setting 1 – eTrike is limited to a maximum speed of 6
MPH. It is recommended that you use this setting when
moving at a slow speed is safer or ideal for the driving
conditions, e.g. driving up or down inclines or indoors. b.
Setting 2 – eTrike is limited to a maximum speed of 12
MPH. It is recommended that you use this setting when
moving at a moderate speed is safer or ideal for the
driving conditions, e.g. inclement weather. c. Setting 3 –
eTrike can travel up to the maximum speed of 18 MPH.
It is recommended that you use this setting when driving
conditions are ideal.
Your eTrike can travel at a maximum speed of 18 MPH. The speed setting switch
regulates your top speed to safely or ideally accommodate driving conditions or your
speed preference.
III. SPEED SETTING SWITCH – 3 SETTINGS
The throttle controls the flow of electrical power to the
motor which propels the eTrike.
a.
Grasp the throttle and roll it backwards/towards
you to propel the eTrike
b. Release the throttle to stop the eTrike from
continuing to propel.
c.
In addition to the speed settings, the current speed of the eTrike within each speed
setting can be regulated by adjusting the amount of roll of the throttle. Full roll to
the throttle’s stopping point allows the eTrike to travel at the maximum speed
within each speed setting.
IV. THROTTLE CONTROLLER – RIGHT HANDLE
