LUNA 24
DMX - PATCH
What is a DMX-patch?
LUNA 24 can control up to 96 DMX channels.
By using patch you route lighting circuits to faders on LUNA 24.
Select patch number:
Press AUDIO MODE- simultaneously with up-key beside.
On display DMX-PATCH and a number are illuminated.
Use arrow-keys to choose one out of 4 possible patches.
Press STORE-key to activate it (MODIFY to cancel).
Change DMX-patch:
Start change mode: Select as said above the patch number.
Is DMX-PATCH illuminated on display press MODIFY- and grey AUX-keys
simultaneously.
Both respective LEDs are illuminated.
Select
Use STOP/BACK- or STEP/GO-keys to select DMX-channel.
DMX-channel:
(press long to fastforward - press both keys to go to channel 1)
The DMX-channel-number is shown on display CHANNEL.
Press grey SEQUENCER-key to flash respective spotlight.
Select fader circuit: On display, lefthand to CHANNEL, it shows which fader circuit of LUNA 24
controls the
respective DMX-channel.
Use arrow-keys below to select fader-channel.
Then the patching is done.
Press both arrows simultaneously to disconnect.
On display „- - „ = no connection is illuminated.
Other connections:
Each time you press CHASER MODE-key the next connection (if there is one)
is shown together with the selected fader circuit.
Preview
Use arrow-keys while pressing CHASER MODE-key to select fader circuit without connections:
changing connections.
Channels in
Select DMX-channels while pressing CHASER MODE-key.
sequence:
The channels are connecting to the selected fader circuit.
(Especially helpful to delete several connections in sequence with “ - -“. )
Delete whole patch: Press DELETE-key for 2 seconds. MODIFY-LED illuminates yellow.
When it illuminates red the DMX-channels 1 -24 are patched to fader circuits 1-24
(factory preset). All other connections are deleted.
Copy patch:
Select patch you wish to copy.
Press AUDIO MODE-key and simultaneously select destination patch.
Release AUDIO MODE-key. The patch is copied.
Store changes:
MODIFY-LED is illuminated red when a patch is changed.
This change is only stored when you press STORE-key.
Quit change mode: Press MODIFY-key. (Unstored changes - MODIFY-LED illuminates red - are lost.)
On display the number of the changed patch is illuminated.
It is illuminated dark if the changed patch is not in use on LUNA 24 at the moment.
Press STORE to activate the changes.
Press MODIFY to keep the old situation active.
AUDIO
MODE
DMX-PATCH
MIDI
DMX-PATCH
ESCAPE
MODIFY
+
AUX
SEQUENCER
STEP
GO
STOP
BACK
CHASER
MODE
ADD STEP
CHANNEL
CHASER
MODE
CHASER
MODE
+
STEP
GO
STOP
BACK
CHASER
MODE
+
DELETE
2 sec.
AUDIO
MODE
+
STORE
ESCAPE
MODIFY
DMX-PATCH
