ETOP PI-P5BVLL, Руководство пользователя

Страница: 84 / 90

76 PI-P5BVLL User`s Manual
ENTER PASSWORD:
Type the password, up to eight characters in length, and press
<Enter>.
The password typed now will clear any previously entered password
from CMOS memory.
You will be asked to confirm the password.
Type the password again and press <Enter>.
You may also press <Esc> to abort the selection and not enter a
password.
To disable a password, just press <Enter> when you are prompted to
enter the password.
A message will confirm the password will be disabled.
Once the password is disabled, the system will boot and you can
enter Setup freely.
Phoenix-Award BIOS CMOS Setup Utility
►
Stand CMOS Features
►
Advanced BIOS Features
►
Advance Chipset Features
►
Integrated Peripherals
►
Power Management
►
PnP/PCI Configuration
►
PC Health Status
►
Frequency/Voltage Control
Load Fail-Safe Default
Load Optimized Default
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Esc :Quit ↑↓← → ： Select Item F10:Save & Exit Setup
PASSWORD DISABLED:
When a password has been enabled, you will be prompted to enter it
every time you try to enter Setup. This prevents an unauthorized
person from changing any part of your system configuration.
Additionally, when a password is enabled, you can also require the
BIOS to request a password every time your system is rebooted. This
would prevent unauthorized use of your computer.
You determine when the password is required within the BIOS
Features Setup Menu and its Security option. If the Security option is
set to “System”, the password will be required both at boot and at
entry to Setup. If set to “Setup”, prompting only occurs when trying
to enter Setup.
PASSWORD DISABLED!!!
Press any key to continue…