ZO
OWNER’S MANUAL
10
SELECT YOUR COUNTY
Zo lets you choose which alerts to receive—
SINGLE for one area; MULTIPLE for up to 25 areas; ALL for
everywhere…or in case you don’t know your code.
1. With radio OFF, press <
MENU
>, then press < > or
< > to select <
COUNTY – ALL /SINGL/MULTI
> mode.
2. Press < > or <
>, when mode flashes, press <
>
or < > to select.
ENTER YOUR CODE
Just a word of warning, you’ll need to work kind of fast on
the instructions below. Sometimes the display will return to
the main menu and you’ll have to start from the beginning.
For a SINGLE code:
1. With selected mode still flashing, press <
> or < >
to begin.
2. Press < > or <
> to set first code digit. Press <
>
or < > to adjust. Repeat for all other digits.
3. Press <
MENU
> twice to confirm and exit.
For MULTIPLE codes:
1. With selected mode still flashing, press <
> or < > to
make “01” flash. This is your first county/province code.
2. Press < > or <
> to set first code digit. Press <
> or
< > to adjust. Repeat for all other digits.
3. Press < > or <
> to return to flashing “01”, press <
>
or < > to adjust to next county/province code. Press
< > or <
> to set first code digit. Press <
> or
< > to adjust. Repeat for all other digits. Repeat for all
county/ province codes.
4. Press <
MENU
> twice to confirm and exit.
