CONNECTING TO APPLE HOMEKIT
(iOS devices only)
1.
Connect the Blackout Buddy Connect Charge to a power source. The flashlight will
blink once indicating it is ready for Wi-Fi setup.
2.
Open the Apple HomeKit app on your iOS device. Tap “+” in the top right corner and
follow the directions to set up your Blackout Buddy Connect Charge.
Note: to add an additional Blackout Buddy Connect Charge or repeat the connection
process, tap “+” and you will see the accessory list. Each accessory has a unique
identification code (e.g. Etón-Blackout Buddy Connect Charge C-XXXXXX). Make sure
the code shown matches the code on the back of the Blackout Buddy Connect Charge.
3.
Scan or manually enter the setup code and follow the directions to add the device to
the Home and Room. Please keep the setup code for future use.
4.
You can assign names to your Blackout Buddy Connect Charge to control it through
Siri. For example, you can name your Blackout Buddy Connect Charge “Flashlight,”
“Nightlight,” and “Motion Sensor” and assign it to the bedroom in HomeKit. You can
then use Siri voice commands, such as “Turn on the bedroom Flashlight,” “Turn on the
bedroom Nightlight,” and “What is the state of the Motion Sensor in the bedroom?”
