08
Projector Settings
ETOE Projector A1192 have two systems, The
[Projector system]
and the
[Android TV]
system, So, the projector setting and Android TV setting is
separated, When setting the projector, Press the
[Projector Home]
Button
back to projector home page, go to
[Setting].
1. Projection setting
Projection mode
[Desktop Front Projection]:
The device is located in front of the projection
surface.
[Desktop Rear Projection]:
The device is located behind the projection
surface.
[Ceiling Front Projection]:
The device is hanging from the ceiling in an
upside-down position. The image is rotated by 180 degrees.
[Ceiling Rear Projection]:
The device is hanging from the ceiling in an
upside down position behind the projection surface. The image is rotated by
180 degrees and horizontally mirrored.
Zoom in/out
Use the remote control, zoom in or out from 50%-100%, fit the image size in a
certain screen
Vertical correction
Vertical keystone correction from 0-100
Horizontal correction
Horizontal keystone correction from 0-100
Four point Correction
Use the remote control,
[OK]
to select the point, 4
[Navigation button]
to
adjust,
[Back]
to exit
Keystone correction reset
Reset Keystone correction value
2. Other settings
Default Input Signal
[Android TV]/[HDMI]/ [USB]/[off]
Select default display signal source from Android TV/HDMI/USB, or go to
home page, When turn on or reboot the projector.
No need switch signal source every time when the projector is turned on.
Language setting
Select your language from [English], [Deutsch], [Français], [Italiano], [Español],
[日本語]
,
[한국어]
.
Restore factory setting
Reset your device and restore factory setting.
Содержание A1192
Страница 1: ...Projector A1192 User Manual ...
