Get started
Placement
(I) Place the projector right towards the projection surface to get a
rectangle picture.
® The distance between the projector and the projection surface
determines the picture size.
® Check the projection distance and screen size on the specifications part.
Prepare the Remote Control
Install the remote control batteries (batteries not
included).
(I) Press and open the battery cover, as illustrated.
® Install two AAA batteries. Make sure that the
positive and negative ends are positioned
correctly, as illustrated.
® Place the battery cover back until it clicks
into place.
Power On
-
(I) Connect the AC cord to the adapter, Plug the adapter into the outlet
® Connect the included adapter to the DC-in port of the projector, and the
LED indicator will be on red light.
® Set the projector towards a suitable projection screen or wall.
@ After plugging on the power, wait for 3-4 seconds, and then press the
power button. The LED indicator will turn green.
Focus
(I) Place the projector towards a suitable projection surface or wall, adjust
the distance for a proper size of picture.
® Scroll the [Focus Adjusting Knob] left or right until the picture is crystal
clear.
06
