background image

3

Do not use this machine for any operation which 

is not described in the Operation manual.
If you have any questions about the operation of 

this machine, contact the Etnyre Service Depart-

ment at 1-800-995-2116 or 1-815-732-2116.
Operations that are not approved could cause 

serious injury or death.

Important

The instructions represented here are a guide and not 

designed to be comprehensive. Refer to M-114-12R 

Centennial Asphalt Distributor Operation, Maintenance and 

Safety manual for complete instructions.
This pamphlet is provided as a tool to aid personnel in the 

operation of the Etnyre Blacktopper Centennial Distributor, 

as with any type of construction equipment, there are certain 

hazards associated with improper or careless operation. 

The ability to read and understand the instructions should 

be a required qualification to become an operator. There 

are also functions that require a certain amount of physical 

strength to accomplish. Persons lacking the required 

strength may not only place themselves in jeopardy, but 

also others in the vicinity. Read and understand the Safety 

precautions found in M-114-12R Centennial Asphalt 

Distributor Operation, Maintenance and Safety manual 

before operating this machine.
If you have any questions regarding this pamphlet or the 

operation of your unit, contact your Etnyre dealer or the  

E. D. Etnyre Service Department at 1-800-995-2116.

WARNING

Contents

Bar Suck Back Override  ................................ 4
Control Panels ................................................ 5
Fill through Manhole ....................................... 6
Fill through Fill Line ........................................ 7
Circulate In Tank ............................................. 8
Circulate In Bar ............................................... 9
Spray ............................................................ 10
Suckback Spraybar ...................................... 11
Handspray .................................................... 12
Handspray Suckback.................................... 13
Unload .......................................................... 14
Transfer ........................................................ 15
Flushing ........................................................ 16
Flushing Bar ................................................. 17
Front Fill (optional equipment) ...................... 18
Etnyre Spray Bar Nozzles ............................ 19

Содержание Centennial A-130-12R





















Отзывы: