If the ‘*’ button is pressed for no more than 1 second, the present set temperature will display 2 seconds.
When pressing the ‘*’ button, the power supply to the heating elements will be out off.
When the temperature setting exceeds the maximum limit, the value of 100 will flash again. If this
condition takes place, please input the correct temperature value again.
4.2
Set temperature during use
During use, if it is necessary to set temperature quickly and the mains power is not switched off, the set
temperature can be adjusted quickly.
Temperature Increase:
Press the ‘
▲
’ button for 1 second. The set temperature will raise 1
℃
. By pressing and holding the ‘
▲
’ button, the
set temperature will raise rapidly. Once the required temperature is reached, then release the ‘
▲
’ button.
Temperature Decrease:
Press the ‘
▼
’button for 1 second. The set temperature will drop 1
℃
. By pressing and holding the ‘
▼
’ button, the
set temperature will drop rapidly. Once the required temperature is reached, then release the ‘
▼
’button.
Ⅴ. Parts list
M4x12(6)
M4x10(8)
Item
No.
Part Name
1
Handle of screw nut
2
Reflow cover
3
Fuse/10A 125V
Fuse/5A 250V
4
Grounding
5
Power cord
6
Top cover
7
Support column
8
Heating accessories
9
Pad loop
10
Screw nut
11
Bottom holder
12
Transformer 110V-13V
Transformer 120V-13V
Transformer 220V-13V
13
Power socket
14
P.W.B
15
Power cover
16
Switch (black)
17
Switch (red)
18
Temperature extrude plate
19
Rubber pad
20
Bottom plate
21
Waterproof connector
