ETNA VWV547SWIT, Инструкция по эксплуатации

Страница: 90 / 116

EN 6
FIRST USE
Before using the dishwasher for the first time:
• Set the water hardness.
• Add 1 litre of water to the salt reservoir and then add 1.5 kg of dishwasher salt.
• Add rinse agent.
• Add detergent.
Setting the water softener
1. Open the door.
2. Press the “on/off” button to switch on the appliance.
3. Press the Rapid program button for more than 5 seconds to start the water softener set
model within 60 seconds after the appliance was switched on (the water softener and Rinse
agent warning lights will be on periodically when it get in the set model ).
4. Press the Rapid program to select the proper set according to your local environment, the
sets will change in the following sequence: H1->H2->H3->H4->H5->H6;
5. Press the “on/off” button to end the set up model.
Water softener table
Adjust the salt consumption according to the table below:
Water hardness
ºClarke ºdH mmol/l Selector Position Salt
consumption
(grams/cycle)
0 - 6 0 - 5 0 - 0,94 H1 (Soak) 0
7 - 14 6 - 11 1,0 - 2,0 H2 (Quick) 9
15 - 21 12 - 17 2,1 - 3,0 H3 (Soak + Quick) 12
22 - 28 18 - 22 3,1 - 4,0 H4 (ECO) 20
29 - 42 23 - 34 4,1 - 6,0 H5 (ECO + Soak) 30
43 - 69 35 - 55 6,1 - 9,8 H6 (ECO + Quick) 60
The manufactory setting: H3 (EN 50242)
Your local water authority can inform you how hard your mains water is.