ETNA VV649WIT, Инструкция по эксплуатации

Страница: 36 / 48

EN 14
INSTALLATION AND CONNECTION
Changing the side on which the door opens
1
2
3
4
6
5
7
9
8
10
1. Remove the cover plates (1) and the screws (2).
2. Remove the top cover (3) and the cover plate (4).
3. Remove the screws (5) and the upper hinge (6).
4. Carefully lift the door from the lower hinge and place it on a padded surface to prevent
scratching.
5. Remove the plug (7) from the top of the door and place it on the opposite side.
6. Remove the screws (8) and the lower hinge (9).
7. Unscrew the adjustable foot (10) and place it on the opposite side.
8. Fit the lower hinge (9) on the opposite side with the screws (8).
9. Slide the door back on to the lower hinge, making sure that the lower hinge pin fits into the
lower hole of the door.
10. Fit the upper hinge (6) on the opposite side with the screws (5).
11. Place the cover plate (4) on the opposite side in the top cover (3).
12. Fit the top cover (3) with the screws (2). Place the cover plates (1).
13. Check that the door is aligned horizontally and vertically and that the seals are closed on all
sides before finally tightening the bottom hinge. Level the appliance with the adjustable feet.