ETNA KVV594, Инструкция по эксплуатации

Страница: 10 / 32

10
682985
CONNECTING THE APPLIANCE
• Connect the appliance to the power mains using a connection cable. The wall outlet
should be fi tted with a ground contact (safety socket). Nominal voltage and frequency
are indicated on the rating plate/label with basic information on the appliance.
• The appliance must be connected to the power mains and grounded in compliance
with the eff ective standards and regulations. The appliance will withstand short-term
deviations from the nominal voltage, but not more than +/- 6%.
• Do not expose the appliance to direct sunlight and do not place it near any source of
heat. If this cannot be avoided, install an insulation panel.
• The appliance may stand alone or it may be placed ext to a cupboard or a wall. Consider
the clearance required to fully open the door in order to allow pulling out the drawers
and shelves (see installation diagram).
1224 mm
717 mm
669 mm
600 mm
710 mm
max 90°
1176 mm
Retro appliance
min 50 mm
1249 mm
688 mm
640 mm
600 mm
644 mm
max 90°
1201 mm