EN 31
FAULTS
Problem with the hob
Possible cause
Solution
Fault code F8 and F08.
Appliance overheated.
Let the appliance cool down
and then start again.
Fault code F9 and/or
continuous beep.
The appliance has been
connected incorrectly and/or
the mains voltage is too high.
Have your connection
changed.
Fault code F99.
You have pressed two or more
buttons at the same time.
Do not operate more than
one button at a time.
Fault code FA.
Mains voltage is too low.
Contact your energy supplier.
Fault code FAN.
Air circulation not good.
Make sure the venting holes
under the cooking plate are
open.
Error code E6.
Unsuitable pan.
Use a suitable pan.
Hardware/software fault.
Contact your service centre.
Other error codes
Defective generator.
Contact your service centre.
Problems with the oven
Possible cause
Solution
The oven does not switch on.
The oven is not set to manual
operation.
Switch the oven to manual
operation (see ‘Operating the
oven’).
The oven does not switch on
after it has been plugged in.
No time of day has been set.
Set a time of day first (see
‘Operating the oven’). The
oven is then ready for use.
The oven does not heat up.
No temperature set.
Set the temperature using the
temperature knob
(see ‘Operating the oven’).
A visit by a service technician during the warranty period will be
charged if the appliance is not functioning because of improper use!
Содержание FIV760RVS
