ETNA EKT1432WIT, Инструкция по эксплуатации

Страница: 23 / 26

21
MAINTENANCE
2. Remove the two screws (3) holding the top
hinge (4) (right side) to the frame. Remove
the top hinge (4).
3. Lift the door off the middle hinge pin and
place it on a nonscratching surface.
4. Remove the two screws (5) holding the
middle hinge (6). Remove the middle
hinge (6).
5. Lift the lower door off the bottom hinge pin
and place it on a nonscratching surface.
6. Remove the two screws (7) holding the
bottom hinge (8). Remove the bottom
hinge (8).
7. Remove the left front leg (9) and transfer it
to the right side.
8. Before replacing the bottom hinge (8),
remove the hinge pin (10) and reverse the
direction of the hinge (8). Reassemble the
bottom hinge (6) on the left hand side using
the two screws (7).
9. Refit the hinge pin (10) into the bottom
hinge (8).
10. Lower the door onto the bottom hinge
pin (10).
11. While holding the lower door in the closed
position, reassemble the middle hinge (6)
on the left hand side using the two screws
(5). Do not tighten the screws (5) until
the top of the lower door is level with the
counter top.
12. Before replacing the upper hinge (4),
remove the hinge pin (11) and reverse the
direction of the hinge (4).Refit the hinge pin
(11) into the upper hinge (4).
13. Lower the upper door onto the middle
hinge pin.
14. While holding the upper door in the closed
position, reassemble the upper hinge (4) on
the left hand side using the two screws (3).
Do not tighten the screws (3) until the top
of the upper door is level with the counter
top.
15. Refit the top panel (2) using the screws (1).
7
3
5
6
4
8
9
1
2
10
11
9
8
10
5
6
3
4
1
2
11
7
Door opening from right side
Door opening from left side