ETNA CM941, Инструкция по эксплуатации

Страница: 44 / 60

EN 16
Microwave quick start
1. Select the microwave function .
▷ The display shows the default power setting.
2. Touch the start key to start the operation of the microwave immediately at maximum power
for 1 minute.
▷ To increase the time, touch the start key again. Each time you touch this key, the time
increases with 30 seconds.
Microwave function
1. Select the microwave function .
▷ The display shows the default power setting.
2. Set the desired power by touching or .
3. Touch .
▷ The display shows the default cooking time.
4. Select the desired cooking time by touching or .
5. Touch the start key to start the operation.
▷ An audio signal will sound, the remaining cooking time will appear on the display and
the
symbol will flash slowly.
▷ Once the cooking time has ended, the oven will turn off, an audio signal will sound and
the
symbol will flash quickly. 'End' appears in the display.
6. Touch the stop key to stop the audio signal and turn off 'End' and the symbol.
7. Set the controls to the position.
You can change the remaining cooking time at any time by touching (several times)
until the symbol starts to flash quickly. Now touch or to change the time.
You cannot see the current time on the display when a cooking time is programmed. The
remaining cooking time will show permanently on the display.
Defrosting by time
1. Select the microwave function .
▷ The display shows 0:10.
2. Touch .
3. Select the desired defrosting time by touching or .
OPERATION