Page 10 of 20
For Support C61-2-9956-7377
Or
Etm770 Users Manual 201709rv01
Main Menu - 3. Network Operators
Signal strength and cell information for available networks can be scanned from a SIM of any valid
network operator. Note that registration on the network and ISP connectivity testing (see above) is
only applicable for the network which provided the SIM.
Scanning a Different Network
To scan the signal from a different network, at the Main Menu use the UP and DOWN buttons to
select 3. Net Operators.
Then once the screen below is shown use the UP and DOWN buttons to select the desired
Network to be scanned.
Once the desired network is selected by pressing ENTER, the unit will wait for a response from the
network and then return to the main menu.
Once back at the main menu 1. Scan Signal can be selected and the signal strength on the new
network scanned as required.