ETIC IPL-I1128, Руководство пользователя, Страница: 25 / 56

CONFIGURATION
IPL-M156 / IPL-I1128 / IPL-L134 router User manual ref. 9017109-01
Page 25
The table below explains the parameters in that three types of
connection.
PSTN or ISDN switched connection
Type of connection
Parameter description
OUT IN
OUT &
IN
X X X
“Enable” parameter :
Select the “yes” option.
X X X
“Type” parameter :
Select the “switched” choice.
X X X
“Node name” parameter :
Assign a name to the node.
X X X
“call direction” parameter :
Select “Outgoing” if the router sets that connection by
dialling towards the remote router.
Select “Ingoing” if the router waits from an incoming
call from the remote router.
Select “Outgoing and incoming” if the connection can
be set either by dialling towards the remote router or
by accepting an incoming call from the remote router.
X X X
“Remote router IP @” and “Remote network
netmask” parameter :
Enter the IP address and the netmask of the remote
router Ethernet interface.
X X
“Modem” parameter :
Select the “built-in” choice.
X X
“Dial number” parameter :
Enter the number the router has to dial to connect
to the remote router.
X X
“My login” and “My password” parameters :
Enter the login and the password the router has to
transmit to the remote router to connect to it.
X X
“Node login” and “Node password” parameters :
Enter the login and the password of the remote
router. These login and password are checked by the
router when a call is incoming.
X X
“Idle time-out” parameter (5 s to 60 mn) :
Set the time duration of the silence before the router
will clear the call.
X X “First packet time-out” parameter (5 s to 60 mn) :