Etic Telecom XSRACK, Руководство пользователя

Страница: 14 / 24

INSTALLATION
Page 14
DOC_DEV_XSRACK_User guide_A
1.4 Connectors
2 positions screw terminal: SHDSL
Position Signal Function
1 Line SHDSL line conductor
2 Line SHDSL line conductor
Ethernet RJ45 connector
Position Signal Function RJ45
1 Tx + Emission po
2 Tx - Emission polarity -
3 Rx + Reception po
4 N.C -
5 N.C -
6 Rx - Reception polarity -
7 N.C. -
8 N.C. -
1.5 Push-buttons
Push-button SLOT1 SLOT2 SLOT3
Pressing the PB
LED
Function
During operation Flashing red Temporary return to the factory configuration.
(IP address 192.168.0.128)
The current configuration is not lost.
During power-up Flashing red
Return to the factory configuration.
The current configuration is deleted except if it has been
saved into a file.