XSLAN+ switches are designed and produced in France by ETIC TELECOM 13 Chemin du vieux chêne 38240
MEYLAN FRANCE TEL : + (33) (0)4-76-04-20-00 - FAX : + (33) (0)4-76-04-20-01 Web :
In case of problem in the product installation, please contact your reseller or our customer support at : E-mail :
1
Documentation
The data sheet and the user guide are available on
The user guide is also embedded into the XSLAN+ and available in PDF format.
Please access to the home page of the XSLAN+ administration server, choose your langage and click on the
User guide link.
2
Getting started
Connect the power supply module to one of the 2 connector following the voltage specified on the sticker and
install the XSLAN+ onto a DIN rail. After about 1 mn, the led on the front of the unit becomes steady green
indicating that the XSLAN+ is ready to work.
3
Setup
The XSLAN+ configuration is done via a PC with an html browser. No extra software is requested. 1
st
configuration
is done directly connecting the PC to any LAN Ethernet port of the XSLAN+.
Access to the administration server : Type « http://192.168.0.128 »
Recovering the factory IP address :
IP 192.168.0.128 and the factory configuration are temporarily recovered
by pressing for 5 s the push button on the top of the unit. Press again the
push button to return to the running configuration.
XSLAN+ SHDSL switch
_______________
QUICK START DATA SHEET
Reference Document: 9022009-01
