7
www.ETiSSL.com
Please contact 1-855-384-7754 for further assistance.
suspension Mounting
noTe:
Separate mounting hardware (not included) not shown to actual size.
1
Preparing to mount the fixture
□
Drill two 1/16 in. diameter holes 33 1/2 inches apart in
the ceiling to accommodate hook screws (not included).
□
Install the hook screws into the mounting surface,
making sure to fasten the combo wood-machine end into
the metal hook.
□
Tighten the hook screws (not included) into the studs.
2
Installing the bracket and clip for
hanging
□
Snap the U bracket (CC) onto the back of the fixture
body (B) near one end.
□
Insert the ends of the V clip (DD) into the openings in the
U bracket (CC).
□
Repeat the installation process for the U bracket (CC) and
V clip (DD) on the other end of the fixture body (B).
3
Hanging the fixture
□
Hook the V clip (DD) on each end of the fixture to the metal hooks installed in the ceiling.
noTe:
Product should be suspended using metal chain or hooks with weight bearing capacity exceeding 11 lbs (5 KG).
noTe:
Eye hooks (not included) or toggle bolts (not
included) can be used as alternate methods of attaching
the fixture to the ceiling.
A
B
DD
CC
A
B
DD
CC