Meter front description
El. meter
Merilni instrument
Mjerni instrument
Miernik
Měřící přístroj
Merací prístroj
Fogyasztásmérő
El. Energijos skaitiklis
Измерительный прибор
Elekro ener
ģijas skaitītājs
Elektriarvesti
Messgerät
DEC-1
004804050
ETI, d.o.o., Obrezija 5, SI-1411 Izlake
www.etigroup.eu/products-services
- 3 -
- 4 -
- 1 -
- 2 -
Dimensions
Compliance
Purpose
Functioning
A special electronic system under the influence of flowing current
and applied voltage generates pulses proportional to the drawn
energy. Energy consumption is indicated by a flashing LED. The
amount of pulses is converted into energy input, and its value is
displayed by the segment LCD display. The fractional digits repre-
sent the hundredths (.01 kWh = 10 Wh).
MID Directive 2014/32/EU
DEC-1 is a static (electronic) calibrated electricity meter of single-
phase alternating current in a direct system.
Pulse output
The meter is equipped with pulse output SO+ – SO-. This allows you
to connect another pulse device (SO) that reads pulses generated
by the meter.
No additional connected equipment is required for proper opera-
tion of the meter.
Sealing
The meter has sealable input and output terminal covers to pre-
vent any attempts to bypass the meter.
Meter number
The meter is marked with individual serial number allowing its
unambiguous identification. The marking is laser engraved and
cannot be removed.
LCD display
kWh reading LED
terminal
covers
sealing points
4,0
62,8
45
52
116,2
18
3
8 3 8 8 9 5
6 2 0 7 2 3