EX42300 series Hardened PoE Ethernet Switch www.etherwan.com
2
W70G-EX42300Q2
The 10/100Base-TX (PoE) and Gigabit Ethernet Connectors
The 10/100Base-TX Connections
The following lists the pinouts of 10/100Base-TX ports.
Pin
Signal Name
Signal Definition
1 TD
＋
Output Transmit Data
＋
2 TD
－
Output Transmit Data
－
3 RD
＋
Input Receive Data
＋
4 PoE
Positive
(VCC
＋
)
5 PoE
Positive
(VCC
＋
)
6 RD
－
Input Receive Data
－
7 PoE
Negative
(VCC
－
)
8 PoE
Negative
(VCC
－
)
The 10/100/1000Base-TX Connections
The following lists the pinouts of 10/100/1000Base-TX ports.
Pin Regular
Ports Uplink
port
1 TP0
＋
Transmit and Receive Data 0
＋
2 TP0
－
Transmit and Receive Data 0
－
3 TP1
＋
Transmit and Receive Data 1
＋
4 TP2
＋
Transmit and Receive Data 2
＋
5 TP2
－
Transmit and Receive Data 2
－
6 TP1
－
Transmit and Receive Data 1
－
7 TP3
＋
Transmit and Receive Data 3
＋
8 TP3
－
Transmit and Receive Data 3
－
The SFP Socket Connections
The SFP socket for Gigabit fiber optic expansion.
The 1000Base-SX/LX Connections
The fiber port pinouts
The Tx (transmit) port of device I is connected to the Rx
(receive) port of device II, and the Rx (receive) port of device I to
the Tx (transmit) port of device II.
The WDM 1000Base-BX Connections
The fiber port pinouts
Only one optical fiber is required to transmit and receive data.
Functional Description
Complies with EN61000-6-2 & EN61000-6-4 EMC Generic standard immunity for
industrial environment.
Supports
802.3/802.3u/802.3ab/802.3z/802.3x. Auto-negotiation:
10/100/1000Mbps, Full/Half-duplex. Auto MDI/MDIX.
1000Base-SX/LX: Multi mode SC or ST type, Single mode SC type.
1000Base-BX: WDM Single mode SC type.
Supports 8192 MAC addresses, 1M bits buffer memory.
Supports
IEEE802.3az Energy Efficient Ethernet (EEE).
High speed, non-blocking four traffic class QoS switch fabric.
Supports Jumbo frame up to 10K Bytes on Gigabit port.
Enable Broadcast Storm Protection by DIP Switch No. 7 to limit 15,000 packets
per second.
Port 1~4 support IEEE802.3at Power over Ethernet (PoE) Power Sourcing
Equipment (PSE) and provide power up to 30W.
Power consumption: 7W Max (Device only, without PoE).
PoE power budget: 120W.
Power Supply: Redundant 24/48VDC Terminal Block power inputs.
Operating temperature ranges from -40
°C
to 75
°C (-40°F to 167°F)
.
Slim design with DIN-Rail mount installation.
Assembly, Startup, and Dismantling
Assembly: Place the device on the DIN rail from above using the slot. Push the
front of the device toward the mounting surface until it audibly snaps into place.
Startup: Connect the supply voltage to start up the device via the terminal block.
Dismantling: Pull out the lower edge and then remove the device from the DIN
rail.
