EX42300 series Hardened PoE Ethernet Switch www.etherwan.com
This quick start guide describes how to install and use the Hardened PoE Ethernet
Switch.
Capable of operating at temperature extremes of -40°C to +75°C, this is the
Switch of choice for harsh environments constrained by space.
The Terminal Block and Power Inputs
Physical Description
The Port Status LEDs
LED State
Indication
Steady
Power on.
Power
(Green)
Off Power
off.
Steady
Relay starts alarm.
Fault
(Red)
Off Relay
non-alarm.
10/100TX Ports
Steady
A valid network connection
established.
Blinking
Transmitting or receiving data.
Act stands for Activity.
Link/Act
(Green)
Off No
link.
Steady
Powered Device is connected.
Off
Powered Device is disconnected.
PoE
(Amber)
Blinking
While Powered Device over 30W.
Gigabit Port
Steady
A valid network connection
established.
Blinking
Transmitting or receiving data.
Act stands for Activity.
Link/Act
(Amber)
Off No
link.
Power Input Assignment
＋
24/48VDC
Power1
－
Power Ground
＋
24/48VDC
Power2
－
Power Ground
Earth Ground
Terminal Block
Relay Output Rating
1A @ 250VAC
DC Terminal Block Power Input: The DC Terminal Block power input can be used to
power up this Switch.
DIP Switch Settings
DIP No.
On
Off
1
Port 1 Alarm Enable.
Port 1 Alarm Disable.
2
Port 2 Alarm Enable.
Port 2 Alarm Disable.
3
Port 3 Alarm Enable.
Port 3 Alarm Disable.
4
Port 4 Alarm Enable.
Port 4 Alarm Disable.
5
Port 5 Alarm Enable.
Port 5 Alarm Disable.
6 (Only for EX42315)
Port 6 Alarm Enable.
Port 6 Alarm Disable.
7
Broadcast Storm Enable.
Broadcast
S
torm Disable.
8
Jumbo Frame Enable.
Jumbo Frame Disable.
1
W70G-EX42300Q2
